Product Type:LH307A
Product performance indicators
| Test items | LH307A | Test methods |
| Appearance | Brown yellow transparent liquid | Measuring with your eyes |
| Flash point (opening)℃ ≥ | 40 | GB/T 261 |
| Kinematic viscosity mm'/s | 3-5 | GB/T 265 |
| Wet heat test (10# steel, grade A)>= | 720h | GB/T 2361 |
Recommended Uses
Suitable for protection of various metals such as cast iron, steel, copper and its alloys
Product Features
Thin oil film;
Need not be removed;
Has certain water displacement and sweat displacement properties;
Low viscosity, less material;
Excellent anti-rust performance;
Can be used by spraying, brushing, or soaking;
How to use
Ensure that the workpiece is clean and dry;
When handling the workpiece, wear gloves to prevent rust caused by fingerprints;
Use in a ventilated area;
If there is a small amount of water film or fingerprints on the surface of the workpiece, it can be directly immersed in the oil and shaken for 1 minute. Parts with grooves, blind holes, and inner cavities need to be turned over and immersed;
Regularly drain the water and impurities deposited at the bottom of the container, and pay attention to adding new oil in an appropriate amount: metal workpieces can be sprayed, brushed, or immersed;
When packaging the workpiece, using anti-rust materials can increase anti-rust protection.
Packaging and storage
Validity period: one year;
"Storage: Store in a sealed container indoors to avoid mixing with water or other impurities; store in a cool and ventilated place away from the sun and rain; keep away from fire sources; transport and store as flammable chemicals.
Precautions
This product can be applied by immersion, spraying or roller at room temperature. No heating is required for winter use. The surface of the workpiece should be clean and dry. During the spraying process, the oil film should be uniform and continuous without any leakage. It is strictly forbidden to touch the workpiece with bare hands or damage the anti-rust oil film.
