Net weight:1KG
1. The mlxing proporlon ot working tluld is about 1'50. users can adlust the mixina proportion accordina to diferent machinetools, processing materials, processing workpiece shape, processing parameters, etc, Avoid hard waler (well water, river water).
2. Before using the prepared working fluid, discharge the original working fluid, and thoroughly clean the working platform andcirculation system of the machine tool, Do not mix it with other working fluid to avoid affecting the performance. After the newlyprepared working fluid is put into operation, the machine starts to cycle for more than 10 minutes, and the cutting may beunstable. After working for a period of time. it will enter into normal state, which is the normal phenomenon of water-solubleworking fluid.
3. Use dense filter screen or colton as much as possible (standard is smooth water flow), The fler screen shall be cleaned orreplaced regularly to avoid the contamination of the working fluid by the dirt on the workpiece as much as possible. When theworking fluid is insufficient, it shall be supplemented in time. when the cutting efficiency is obviously reduced or the cuttingcannot be moved, it shall be replaced with a new working fluid in time.
4. The chip removal performance is outstanding. lt can be used to cut workpieces with large thickness. After cutting, generallyworkpieces will not fall off automatically, and molybdenum wire will not be broken, but they can fall down by pushing lightly.
5. The product is a weak alkaline liquid (pH value 9-10), Although it is an environment-friendly and non-toxic product, it is alsonecessary to avoid long-term contact with the skin and wash it with water in time to avoid skin allergy.
