In the wire cutting industry, many people are troubled by the molybdenum wire being broken by the workpiece they cut, so they have to use emulsified oil, which is dirty and smelly. Long-term use may be harmful to the body. Moreover, if environmental protection is frequently checked, it will be closed down.
The fast wire cutting emulsified paste does not drop material, has fast cutting speed and long service life. It is more than 30% more efficient than traditional emulsified oil, and can be used continuously for more than 3 months. It does not contain nitrite and other ingredients, and the machine tool and the workplace are clean and do not smell. It is deeply loved by wire cutting operators. With the purpose of reducing costs and improving efficiency, we put an end to the era of using dirty and smelly emulsified oil! !
1. The machine will not rust after being shut down for 20 days in summer;
2. The working fluid will not stink after continuous operation (paste filling) for 3 months in summer;
3. The work surface is clean and does not need to be cleaned after continuous cutting of more than 1 million square meters;
4. 4A continuously cuts 100,000 square meters of 45# steel from 0.18mm to 0.165mm;
5. The PH value is stable at around 9, which does not hurt the hands or corrode, and is suitable for cutting copper and aluminum;
6. The conductivity is moderate, and the 4A current is always stable.
The workpiece will not fall off, and you no longer have to worry about breaking the molybdenum wire
After processing, you can take out the workpiece and clean it with a light poke